S-type load cells derive their name from their shape which, of course, is the shape of the letter “S”. The S type beam is normally used in tensions applications. They are primarily used for mechanical-to-electronic scale conversions and specific weighing applications like cranes, big bags etc. This model is providing wide range from 25 kg to 30 ton.
- Nickel plated alloy steel IP67 “S” type load cell.
- Tension and compression applications.
- Also available in imperial capacities and dimensions.
- Suitable for hanging, hopper and other weighing devices.
- OIML approved.
- NTEP Certificate no. 06-099A1
- ATEX Optional
The S Beam Load Cell is one of the most popular types of load cells. It was originally designed for in-line applications to convert mechanical scale to digital by replacing the spring or other in-line hardware. The S Beam Load Cell is available in variety of load ranges with both English & Metric threads. It is very popular due to its high precision, low price, and ease of installation. But since S Beam Load Cells are strictly designed for in-line applications they are very sensitive to extraneous load, torque, and moments. Off center loading must be avoided for the best performance & longer service life. Please refer to the pancake type load cell for applications requiring off center loading or extraneous load, moment and torque capabilities.
|Accuracy class||OIML R60 C3||OIML R60 C4||C3|
|Output sensitivity ( = FS )||mV/V||2.0 ± 0.004|
Maximum capacity ( Emax )
|0.1, 0.15, 0.2, 0.25, 0.3, 0.5, 0.6,|
0.75, 1, 1.5, 2, 2.5
|0.025, 0.05, 3.0,|
5.0, 7.5, 10, 15,
|Max. number of load cell intervals||nLC||3000||4000||3000|
|Ratio of min. LC verification interval||Y = Emax / vmin||10000||20000||10000|
|Combined Error||%FS||≤± 0.020||≤± 0.018||≤± 0.020|
|Minimum dead load||of Emax||0%|
|Safe overload||of Emax||150 %|
|Ultimate overload||of Emax||300 %|
|Zero balance||of FS||< ± 1.5 %|
|Excitation, recommended voltage||V||5 ~ 12|
|Input resistance||Ω||350 ± 3.5|
|Output resistance||Ω||351 ± 2.0|
|Insulation resistance||MΩ||≥5000 ( at 50VDC )|
|Compensated temperature||°C||-10 ~+40|
|Operating temperature||°C||-35 ~ +65|
|Storage temperature||°C||-40 ~ +70|
|Element material||Nickel plated alloy steel|
|Ingress Protection (acc. to EN 60529)||IP67|
|Recommended torque on fixation||Nm||M8:25 M10: 50 M12:75 M20:450 M33:750 M42:1450|
|ATEX classification (optional)||II1G Ex ia II1C T4||II1D Ex iaD 20 T73°C||II3G nL IIC T4|