Dini Argeo DGTQ Weight Transmitter, Indicator, and Controller

Price range: 1.525,00 د.ع through 1.910,00 د.ع (Excl. VAT)

Multipurpose weight indicator/transmitter for panel mounting, 4 dependent or independent channels for direct reading, and diagnostics of each connected load cell. The wide range of available interfaces makes it easy to integrate the weighing with any automation system.

  • LED Display,
  • Easy calibration, Set-Up parameters, configurable from keyboard or from PC with DINI TOOLS software
  • Power supply from 12 to 24 VDC.
  • 1-year warranty

 

Description

Approvals: CE-M EN 45501, OIML R-76, OIML R-61 (MID), OIML R-51 (MID), Australian approval

Main Features

  • Easy to use 5-key waterproof keyboard.
  • Highly efficient red LED display with 6 13-mm digits and 6 LEDs for showing active functions.
  • The case for panel mounting in Abs according to DIN standard, 96x96x80 mm (lxhxpx). Perforation 90×88 mm (lxh) for panel mounting.
  • Calibration, Set-Up parameters, configurable from keyboard or from PC with DINI TOOLS
  • Up to 10.000e or multirange 2 x 3000e @ 0,3 µV/e in CE-M approved version for legal for trade use.
  • Up to 800.000 displayable divisions with internal resolution up to 3.000.000 points.
  • Up to 8 signal linearization points with DINITOOLS (3 from keypad).
  • A/D 24-bit sigma-delta conversion, up to 400 conv./sec. auto-select.
  • Connectable with up to 8 analog load cells with 350 Ohm input resistance.
  • Management of a digitally equalized 4-cell weighing system or management of 4 independent weighing systems.
  • Master/Slave management (up to 4 Slaves / 1 Master).
  • From 12 Vdc to 24 Vdc power supply.

 

I/O Section

  • RS232/C bidirectional port is configurable for connection with external units.
  • RS485 or RS232/C bi-directional port is configurable for network connection.
  • PROFIBUS serial interface (DGTQPB model).
  • 2 photomosfet outputs, expandable to 6 through the C4OUT option: 150 mA 48 Vac / 150 mA 60 Vdc (NO), with configurable functions.
  • 2 optoisolator photocoupler inputs: 12÷24 Vdc, 5 mA min – 20 mA max, with configurable functions.
  • 16-bit analogue output (DGTQAN model) 4-20mA / 0-5Vdc / 0-10Vdc at choice. Maximum load applicable on the output current: 300Ohm. Minimum load applicable on the output voltage: 1kOhm.

 

Functions

  • THROUGH KEYBOARD:
    Zeroing; Semi automatic and presettable tare, print and/or data transmission; ON/Stand-by.
  • SELECTABLE:
    High Resolution Weighing x 10; Lb/kg conversion; Approved transmission of the weight to PC/PLC (with ALMEM Alibi memory option) e Peak.Available in 7.15 firmware version downloadable from the DOWNLOAD area:
    Net/Gross; Weighs totalisation; Formulation; Counting; In/Out Truck weighing and Hold.
  • EXTERNAL INPUT:
    Simulation of key pressure; Keyboard lock.
  • MOSFET OUTPUT:
    SetPoint Control on the weight, either positive (in loading) or negative (in unloading), or on the pieces (counting mode), with programmable enabling/disabling thresholds, as a direct check or upon weight stability.
  • SERIAL PORTS:
    On all models: Reading of the net, gross, and tare weights; Clearing; Semi automatic and presettable tare; Scale switch; Setting of outputs activation thresholds; Reading/Writing of Alibi Memory.
    DGTQ and DGTQAN models: Reading of microvolts or ADC converter for all the channels; Message display; Printing; Setting of APW in counting mode; Simulation of key pressure; MODBUS serial protocol.
  • THROUGH 16 bit ANALOGUE OUTPUT (DGTQAN):
    Analog output proportional to the net or gross weight, either positive (in loading) or negative (in unloading).

 

Optional:-

MASTER/REPEATER OPTION (MSTSLV code)

  • A specific program for use of the indicator as a universal weight repeater or as a multi-scale repeater (MASTER) in combination with DFW/DGT/MCW.

FUNCTIONING MODES:

  • Multi-scale repeater (MASTER)
    The function allows to repeat up to 32 independent scales, with the possibility of managing their functions or displaying and printing the sum of the weights of all the scales.
  • UNIVERSAL weight repeater
    The function allows repeating the weight of any scale, through the configuration of the input string.

Additional information

Model / Part No.

DGTQ, DGTQAN, DGTQPB-1

Description

Transmitter for panel mounting, with 2 IN and 2 OUT. 5-key keypad, LED display, and standard weighing program., Transmitter for panel mounting, with 2 IN, 2 OUT, analog output. 5-key keypad, LED display, and standard weighing program., Transmitter for panel mounting, with 2 IN, 2 OUT, Profibus. 5-key keypad, LED display, and standard weighing program.

Interface

Profibus

Brand

Dini Argeo

Dini Argeo Company Dini Argeo specializes in manufacturing weighing systems and has extensive expertise in mechanics, electronics, and information technology. They provide comprehensive solutions in the field of mechatronics, catering to a wide range of applications such as mobile weighing systems and scales for commercial and industrial purposes. Their offerings include various components, electronic solutions, and software that support industrial automation and the integration of systems. With a rich history of more than 100 years in weighing, batching, and industrial automation, Dini Argeo is committed to delivering cutting-edge technology that ensures the utmost precision and compliance with international standards. In 2016, Rice Lake Weighing Systems acquired Dini Argeo, leveraging the strengths and shared values of both brands. This partnership enhances the product and service offerings for customers in Europe and worldwide. DINI ARGEO S.r.l. Contact Information: DINI ARGEO S.r.l. Via della Fisica, 20 41042 Spezzano di Fiorano Mod.se (MO) - Italy VAT Reg. No./Tax code: VAT IT00767800360 Chamber of Commerce of Modena (CCIAA Modena) Capital Stock: € 500.000,00 Products Dini Argeo manufactures a wide range of weighing equipment, including load cells, tension load cells, wheel weighing pads, shear beams, weight indicators, pallet truck scales, platform bench scales, and more. Their products are designed with various specifications and features to cater to different industries and applications. Petra Mechatronics is a trusted distributor of Dini Argeo's weighing equipment in the UAE, Saudi Arabia, Kuwait, Bahrain, Oman, Qatar, Jordan, Egypt, and other GCC countries.