Description
Features of the AT-R Series
- Easy Settings Enable Responsiveness and Stability to be Freely Changed:
- Responsiveness becomes very important when weighing fixed amounts of powders and liquids. On the other hand, stability is required when weighing substances in environments subject to drafts or vibrations.
- The AT-R balances are equipped with a 5-stage indicator.
- It is easy to switch between a response focus (R) and a stability focus (S) during measurements.
- Response-focused (R) for weighing process
- Stability-focused (S) when vibrations become a concern
- Equipped with Two Interfaces: USB and RS232C
- The balances are equipped as standard with two convenient interfaces for connection with a computer or PLC (programmable logic controller).
- Human error can be prevented by the direct transfer of weight values to the computer.
- The balances have been shown to operate with the following PLCs from major companies.
- Mitsubishi Electric Q Series
- Keyence KV-8000
- OMRON CJ2 Series
- IDEC FC6A Series
- Addition of an Ionizer Increases Measurement Reliability
- The optional STABLO™-AP ionizer (static remover) quickly removes static from samples and containers, without creating a draft. This prevents reproducibility errors and fluctuations in measurement values due to static electricity. The static elimination can be enhanced by placing flasks in the AP Holder (sold separately).

- The optional STABLO™-AP ionizer (static remover) quickly removes static from samples and containers, without creating a draft. This prevents reproducibility errors and fluctuations in measurement values due to static electricity. The static elimination can be enhanced by placing flasks in the AP Holder (sold separately).
AT-R Series Specifications:
| Model | ATX324R | ATX224R | ATX124R | ATX84R | ATY324R | ATY224R | ATY124R | ATY64R |
| Weighing Capacity | 320g | 220g | 120g | 82g | 320g | 220g | 120g | 62g |
| Minimum Display | 0.1mg | |||||||
| Pan Size | Approx. 91 mm dia. | |||||||
| Dimensions | Approx. W213 × D356 × H338 mm | |||||||
| Weight | Approx. 6.2 kg | Approx. 6.0 kg | ||||||
| Required Power Supply | AC adapter (input 100-240 V AC, 50/60 Hz, output 12 V, 1 A) | |||||||
| I/O Terminals | RS232C (D-sub 9P plug), USB device (Type B) | |||||||
| Calibration Weight | Built-in | External weight | ||||||
Optional Accessories
- EP-100 Printer
- EP-110 Printer
- USB Cable Set
- SMK-501 Specific Gravity Measurement Kit
- AP Holder
- Protective Cover (5 pc set)
- AC Adapter (provided as standard with the main unit)



